The fire control panel is in a modular structure in an oven-painted housing made of sheet metal of at least 1,5 mm thickness and can be mounted on the wall. Maximum 30 companents as detectors, buttons, etc. can be connected each detection line of fire detection and warning panel. Conventional type fire control panel is continuously monitored by a circuit with microprocessor control. In case of a fault, it gives a warning about this situation with the malfunction LED. Turkish or other language options can be adjusted with the menu of the panel.
- Zone test
- Disable zones
- Checking the status of audible alarm outputs
- Changing the program structure of the system
- Operation of the fire alarm system
- Fire detection, alarm and fault monitoring with LEDs on the control panel
- Continuous monitoring of elements on detection lines
- Panel warns if there is a problem with devices or detection line
- Testing the fire alarm system by a single person
- Automatically reset
The fire alarm system operates with 24 V DC voltage. This voltage is supplied from a supply unit with 220 V AC, 50 HZ input for fire alarm and detection systems. The unit also charges a 24 V maintenance free sealed battery pack. When 220 V AC voltage is cut, the system is automatically fed from the battery.
Optical Smoke Detectors
Operate on the principle of light distributing. An infrared light normally falls from emitter to the receiver. When smoke enters between emmitter and reciever detector will give alarm.
The detectors have two LEDs placed at 180 degrees to each other, where the operating status can be monitored. The socket does not contain any electronic circuit. The detectors can be easily removed and attached to the socket. The conventional optical smoke detector indicates the alarm condition in light with a lamp on it.
The detector must be compatible with the fire alarm and warning panel to be used. The detector can operate at 0 to + 55°C and 20-95% relative humidity.
Constant Temperature Detector
It gives an alarm if the ambient temperature exceeds a pre-selected value. The detector has two types that can alarm at temperatures of 58°C (135F) and 88°C (190F).
There are two LEDs on the optical temperature detectors placed at 180 degrees to each other, where the working status can be monitored. The socket does not contain any electronic circuit. The detectors can be easily removed and attached to the socket.
Temperature Rise Detector
It is a conventional temperature detector that gives an alarm when it reaches 58 ° C even in sudden temperature increases or even if the temperature rises slowly. Dedector has a double temperature sensor that while one is directly affected by the ambient temperature, the other is placed to be indirectly and more slowly affected. By evaluating the difference between these two sensors, it is possible to feel sudden temperature spikes very quickly.